diff --git a/lang/bg_bg.json b/lang/bg_bg.json
index 5f41911..daee629 100644
--- a/lang/bg_bg.json
+++ b/lang/bg_bg.json
@@ -159,25 +159,26 @@
     "Err L:": "Грешка Л:",
     "Check circularity": "Проверка на кръговостта",
 
-    "Can I reset a permanent calibration to previous calibration?": "",
-    "No.": "",
-    "Can you overwrite a permanent calibration?": "",
-    "Yes. Simply do another permanent calibration.": "",
-    "Does this software resolve stickdrift?": "",
-    "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "",
-    "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "",
-    "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "",
-    "(Dualsense) Will updating the firmware reset calibration?": "",
-    "After range calibration, joysticks always go in corners.": "",
-    "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "",
-    "Please read the instructions.": "",
-    "You have to rotate the joysticks before you press \"Done\".": "",
-    "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
-    "Only after you have done that, you click on \"Done\".": "",
+    "Can I reset a permanent calibration to previous calibration?": "Мога ли да върна постоянна калибровка към предишна калибровка?",
+    "No.": "Не.",
+    "Can you overwrite a permanent calibration?": "Може ли да се презапише постоянна калибровка?",
+    "Yes. Simply do another permanent calibration.": "Да.Просто направете нова постоянна калибровка.",
+    "Does this software resolve stickdrift?": "Този софтуер решава ли проблема със стикдрифт?",
+    "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "Стикдрифтът е причинен от физически дефект;а именно замърсяване, износен потенциометър или в някои случаи износена пружина.",
+    "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "Този софтуер няма да поправи стикдрифта сам по себе си, ако вече изпитвате този проблем. Помага да осигури правилната работа на новите джойстици след замяната на старите, за да функционират добре.",
+    "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "Забелязал съм, че някои контролери от фабриката имат по-лоша калибровка, отколкото ако ги прекалибрирам. Особено вярно е за кръговите движения на контролерите SCUF с уникална обвивка.",
+    "(Dualsense) Will updating the firmware reset calibration?": "(Dualsense) Актуализирането на фърмуера ще нулира ли калибрирането?",
+    "After range calibration, joysticks always go in corners.": "След калибровката на обхвата, джойстиците винаги отиват в ъглите.",
+    "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "Този проблем възниква, защото сте натиснали „Готово“ веднага след започване на калибровката на обхвата.",
+    "Please read the instructions.": "Моля, прочетете инструкциите.",
+    "You have to rotate the joysticks before you press \"Done\".": "Трябва да завъртите джойстиците, преди да натиснете \"Готово\".",
+    "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "Убедете се, че докосвате краищата на рамката на джойстика и завъртате бавно, предпочитано в двете посоки - по часовниковата стрелка и обратно на часовниковата стрелка.",
+    "Only after you have done that, you click on \"Done\".": "Само след като сте направили това, натиснете \"Готово\".",
+
+    "Changes saved successfully": "Промените са запазени успешно",
+    "Error while saving changes:": "Грешка при запазване на промените:",
+    "Save changes permanently": "Запазете промените постоянно",
+    "Reboot controller": "Рестартирайте контролера",
 
-    "Changes saved successfully": "",
-    "Error while saving changes:": "",
-    "Save changes permanently": "",
-    "Reboot controller": "",
     "": ""
 }
diff --git a/lang/ru_ru.json b/lang/ru_ru.json
index b9bf439..1ec59dd 100644
--- a/lang/ru_ru.json
+++ b/lang/ru_ru.json
@@ -161,25 +161,26 @@
     "Err L:": "Ошибка Л:",
     "Check circularity": "Проверить округлость",
 
-    "Can I reset a permanent calibration to previous calibration?": "",
-    "No.": "",
-    "Can you overwrite a permanent calibration?": "",
-    "Yes. Simply do another permanent calibration.": "",
-    "Does this software resolve stickdrift?": "",
-    "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "",
-    "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "",
-    "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "",
-    "(Dualsense) Will updating the firmware reset calibration?": "",
-    "After range calibration, joysticks always go in corners.": "",
-    "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "",
-    "Please read the instructions.": "",
-    "You have to rotate the joysticks before you press \"Done\".": "",
-    "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
-    "Only after you have done that, you click on \"Done\".": "",
+    "Can I reset a permanent calibration to previous calibration?": "Можно ли сбросить постоянную калибровку на предыдущую?",
+    "No.": "Нет.",
+    "Can you overwrite a permanent calibration?": "Можно ли перезаписать постоянную калибровку?",
+    "Yes. Simply do another permanent calibration.": "Да. Просто выполните другую постоянную калибровку.",
+    "Does this software resolve stickdrift?": "Это программное обеспечение решает проблему дрифта стика?",
+    "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "Дрифт стика вызван физическим дефектом, а именно грязью, изношенным потенциометром или, в некоторых случаях, изношенной пружиной.",
+    "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "Это программное обеспечение само по себе не исправит дрифт стика, если вы уже сталкиваетесь с этой проблемой. Однако оно поможет убедиться, что новый джойстик(и) будет(ут) правильно работать после замены старого(ых).",
+    "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "Я заметил, что некоторые контроллеры с завода имеют худшую калибровку, чем если бы я их откалибровал. Это особенно касается круговой точности контроллеров SCUF с уникальной оболочкой.",
+    "(Dualsense) Will updating the firmware reset calibration?": "Обновление прошивки (Dualsense) сбросит калибровку?",
+    "After range calibration, joysticks always go in corners.": "После калибровки диапазона джойстики всегда уходят в углы.",
+    "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "Эта проблема возникает, потому что вы нажали \"Готово\" сразу после начала калибровки диапазона.",
+    "Please read the instructions.": "Пожалуйста, прочитайте инструкции.",
+    "You have to rotate the joysticks before you press \"Done\".": "Вы должны вращать джойстики перед тем, как нажать \"Готово\".",
+    "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "Убедитесь, что касаетесь краев рамы джойстика и вращайте медленно, предпочтительно в обоих направлениях — по часовой стрелке и против часовой стрелки.",
+    "Only after you have done that, you click on \"Done\".": "Только после того, как вы это сделали, нажмите \"Готово\".",
+
+    "Changes saved successfully": "Изменения успешно сохранены",
+    "Error while saving changes:": "Ошибка при сохранении изменений:",
+    "Save changes permanently": "Сохранить изменения навсегда",
+    "Reboot controller": "Перезагрузить контроллер",
 
-    "Changes saved successfully": "",
-    "Error while saving changes:": "",
-    "Save changes permanently": "",
-    "Reboot controller": "",
 	"": ""
 }
diff --git a/lang/tr_tr.json b/lang/tr_tr.json
index 621ca1a..b3bf97f 100644
--- a/lang/tr_tr.json
+++ b/lang/tr_tr.json
@@ -160,25 +160,26 @@
     "Err L:": "Hata S:",
     "Check circularity": "Daireselliği kontrol et",
 
-    "Can I reset a permanent calibration to previous calibration?": "",
-    "No.": "",
-    "Can you overwrite a permanent calibration?": "",
-    "Yes. Simply do another permanent calibration.": "",
-    "Does this software resolve stickdrift?": "",
-    "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "",
-    "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "",
-    "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "",
-    "(Dualsense) Will updating the firmware reset calibration?": "",
-    "After range calibration, joysticks always go in corners.": "",
-    "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "",
-    "Please read the instructions.": "",
-    "You have to rotate the joysticks before you press \"Done\".": "",
-    "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "",
-    "Only after you have done that, you click on \"Done\".": "",
+    "Can I reset a permanent calibration to previous calibration?": "Kalıcı bir kalibrasyonu önceki kalibrasyona sıfırlayabilir miyim?",
+    "No.": "Hayır.",
+    "Can you overwrite a permanent calibration?": "Kalıcı bir kalibrasyonun üzerine yeniden yazabilirmiyiz",
+    "Yes. Simply do another permanent calibration.": "Evet. Sadece yeni bir kalıcı kalibrasyon yapın.",
+    "Does this software resolve stickdrift?": "Bu yazılım analog kaydırma sorununu çözer mi?",
+    "Stickdrift is caused by a physical defect; namely dirt, worn potentiometer or in some cases a worn spring.": "Analog kaydırması fiziksel bir arızadan kaynaklanır; kir, aşınmış potansiyometre veya bazı durumlarda aşınmış bir yaydan.",
+    "This software will not fix stick drift on its own if you already experience that. What it will help with, is ensuring the new joystick(s) will function properly after replacing the old one(s) to work well with.": "Eğer analog kaydırma sorunu yaşıyorsanız bu yazılım onu kendi başına çözmez. Ancak, eski joystickleri yenileriyle değiştirdikten sonra, yenilerinin düzgün çalışmasını sağlamaya yardımcı olur.",
+    "I have noticed some controllers out of the box have worse factory calibration than if I would recalibrate them. Especially true for circularity of SCUF controllers with a unique shell.": "Kutudan sıfır çıkan bazı kolların fabrika kalibrasyonlarının benim yeniden kalibre ettiklerimden daha kötü olduğunu fark ettim. Özellikle benzersiz bir dış kasaya sahip SCUF kontrol cihazlarının daireselliği için bu durum geçerli.",
+    "(Dualsense) Will updating the firmware reset calibration?": "(Dualsense) Firmware güncellemesi kalibrasyonu sıfırlar mı?",
+    "After range calibration, joysticks always go in corners.": "Ara mesafe kalibrasyonundan sonra, analoglar her zaman köşeye gidiyor.",
+    "This issue happens because you have clicked \"Done\" immediately after starting a range calibration.": "Bu sorun, ara mesafe kalibrasyonuna başladıktan hemen sonra \"Tamam\" butonuna bastığınız için meydana gelir.",
+    "Please read the instructions.": "Lütfen talimatları okuyun.",
+    "You have to rotate the joysticks before you press \"Done\".": "\"Tamam\" butonuna basmadan önce joystickleri döndürmelisiniz.",
+    "Make sure to touch the edges of the joystick frame and rotate slowly, preferably in each direction - clockwise and anti-clockwise.": "Analog çerçevesinin kenarlarına dokunduğunuzdan emin olun ve yavaşça döndürün; tercihen her iki yönde - hem saat yönünde, hem saat yönünün tersine.",
+    "Only after you have done that, you click on \"Done\".": "Ancak bunu yaptıktan sonra \"Tamam\" butonuna basmalısınız.",
+
+    "Changes saved successfully": "Değişiklikler başarıyla kaydedildi.",
+    "Error while saving changes:": "Değişiklikleri kaydederken hata:",
+    "Save changes permanently": "Değişiklikleri kalıcı olarak kaydet",
+    "Reboot controller": "Denetleyiciyi yeniden başlat",
 
-    "Changes saved successfully": "",
-    "Error while saving changes:": "",
-    "Save changes permanently": "",
-    "Reboot controller": "",
 	"": ""
 }