277 lines
11 KiB
C
277 lines
11 KiB
C
/* --------------------------------------------------------------------------
|
|
* Copyright (c) 2013-2022 Arm Limited. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the License); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
* --------------------------------------------------------------------------
|
|
*
|
|
* $Revision: V10.4.0
|
|
*
|
|
* Project: CMSIS-FreeRTOS
|
|
* Title: FreeRTOS configuration definitions
|
|
*
|
|
* --------------------------------------------------------------------------*/
|
|
|
|
#ifndef FREERTOS_CONFIG_H
|
|
#define FREERTOS_CONFIG_H
|
|
|
|
/*-----------------------------------------------------------
|
|
* Application specific definitions.
|
|
*
|
|
* These definitions should be adjusted for your particular hardware and
|
|
* application requirements.
|
|
*
|
|
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
|
|
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
|
|
*
|
|
* See http://www.freertos.org/a00110.html
|
|
*----------------------------------------------------------*/
|
|
|
|
#if (defined(__ARMCC_VERSION) || defined(__GNUC__) || defined(__ICCARM__))
|
|
#include <stdint.h>
|
|
|
|
#include "RTE_Components.h"
|
|
#include CMSIS_device_header
|
|
#endif
|
|
|
|
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
|
|
|
|
// <o>Minimal stack size [words] <0-65535>
|
|
// <i> Stack for idle task and default task stack in words.
|
|
// <i> Default: 128
|
|
#define configMINIMAL_STACK_SIZE ((uint16_t)(128))
|
|
|
|
// <o>Total heap size [bytes] <0-0xFFFFFFFF>
|
|
// <i> Heap memory size in bytes.
|
|
// <i> Default: 8192
|
|
#define configTOTAL_HEAP_SIZE ((size_t)65536)
|
|
|
|
// <o>Kernel tick frequency [Hz] <0-0xFFFFFFFF>
|
|
// <i> Kernel tick rate in Hz.
|
|
// <i> Default: 1000
|
|
#define configTICK_RATE_HZ ((TickType_t)1000)
|
|
|
|
// <o>Timer task stack depth [words] <0-65535>
|
|
// <i> Stack for timer task in words.
|
|
// <i> Default: 80
|
|
#define configTIMER_TASK_STACK_DEPTH 80
|
|
|
|
// <o>Timer task priority <0-56>
|
|
// <i> Timer task priority.
|
|
// <i> Default: 40 (High)
|
|
#define configTIMER_TASK_PRIORITY 40
|
|
|
|
// <o>Timer queue length <0-1024>
|
|
// <i> Timer command queue length.
|
|
// <i> Default: 5
|
|
#define configTIMER_QUEUE_LENGTH 5
|
|
|
|
// <o>Preemption interrupt priority
|
|
// <i> Maximum priority of interrupts that are safe to call FreeRTOS API.
|
|
// <i> Default: 16
|
|
#define configMAX_SYSCALL_INTERRUPT_PRIORITY 16
|
|
|
|
// <q>Use time slicing
|
|
// <i> Enable setting to use timeslicing.
|
|
// <i> Default: 1
|
|
#define configUSE_TIME_SLICING 1
|
|
|
|
// <q>Use tickless idle
|
|
// <i> Enable low power tickless mode to stop the periodic tick interrupt during idle periods or
|
|
// <i> disable it to keep the tick interrupt running at all times.
|
|
// <i> Default: 0
|
|
#define configUSE_TICKLESS_IDLE 0
|
|
|
|
// <q>Idle should yield
|
|
// <i> Control Yield behaviour of the idle task.
|
|
// <i> Default: 1
|
|
#define configIDLE_SHOULD_YIELD 1
|
|
|
|
// <o>Check for stack overflow
|
|
// <0=>Disable <1=>Method one <2=>Method two
|
|
// <i> Enable or disable stack overflow checking.
|
|
// <i> Callback function vApplicationStackOverflowHook implementation is required when stack checking is enabled.
|
|
// <i> Default: 0
|
|
#define configCHECK_FOR_STACK_OVERFLOW 2
|
|
|
|
// <q>Use idle hook
|
|
// <i> Enable callback function call on each idle task iteration.
|
|
// <i> Callback function vApplicationIdleHook implementation is required when idle hook is enabled.
|
|
// <i> Default: 0
|
|
#define configUSE_IDLE_HOOK 0
|
|
|
|
// <q>Use tick hook
|
|
// <i> Enable callback function call during each tick interrupt.
|
|
// <i> Callback function vApplicationTickHook implementation is required when tick hook is enabled.
|
|
// <i> Default: 0
|
|
#define configUSE_TICK_HOOK 0
|
|
|
|
// <q>Use deamon task startup hook
|
|
// <i> Enable callback function call when timer service starts.
|
|
// <i> Callback function vApplicationDaemonTaskStartupHook implementation is required when deamon task startup hook is enabled.
|
|
// <i> Default: 0
|
|
#define configUSE_DAEMON_TASK_STARTUP_HOOK 0
|
|
|
|
// <q>Use malloc failed hook
|
|
// <i> Enable callback function call when out of dynamic memory.
|
|
// <i> Callback function vApplicationMallocFailedHook implementation is required when malloc failed hook is enabled.
|
|
// <i> Default: 0
|
|
#define configUSE_MALLOC_FAILED_HOOK 0
|
|
|
|
// <o>Queue registry size
|
|
// <i> Define maximum number of queue objects registered for debug purposes.
|
|
// <i> The queue registry is used by kernel aware debuggers to locate queue and semaphore structures and display associated text names.
|
|
// <i> Default: 0
|
|
#define configQUEUE_REGISTRY_SIZE 0
|
|
|
|
// <h>Event Recorder configuration
|
|
// <i> Initialize and setup Event Recorder level filtering.
|
|
// <i> Settings have no effect when Event Recorder is not present.
|
|
|
|
// <q>Initialize Event Recorder
|
|
// <i> Initialize Event Recorder before FreeRTOS kernel start.
|
|
// <i> Default: 1
|
|
#define configEVR_INITIALIZE 1
|
|
|
|
// <e>Setup recording level filter
|
|
// <i> Enable configuration of FreeRTOS events recording level
|
|
// <i> Default: 1
|
|
#define configEVR_SETUP_LEVEL 1
|
|
|
|
// <o>Tasks functions
|
|
// <i> Define event recording level bitmask for events generated from Tasks functions.
|
|
// <i> Default: 0x05
|
|
// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
|
|
#define configEVR_LEVEL_TASKS 0x05
|
|
|
|
// <o>Queue functions
|
|
// <i> Define event recording level bitmask for events generated from Queue functions.
|
|
// <i> Default: 0x05
|
|
// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
|
|
#define configEVR_LEVEL_QUEUE 0x05
|
|
|
|
// <o>Timer functions
|
|
// <i> Define event recording level bitmask for events generated from Timer functions.
|
|
// <i> Default: 0x05
|
|
// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
|
|
#define configEVR_LEVEL_TIMERS 0x05
|
|
|
|
// <o>Event Groups functions
|
|
// <i> Define event recording level bitmask for events generated from Event Groups functions.
|
|
// <i> Default: 0x05
|
|
// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
|
|
#define configEVR_LEVEL_EVENTGROUPS 0x05
|
|
|
|
// <o>Heap functions
|
|
// <i> Define event recording level bitmask for events generated from Heap functions.
|
|
// <i> Default: 0x05
|
|
// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
|
|
#define configEVR_LEVEL_HEAP 0x05
|
|
|
|
// <o>Stream Buffer functions
|
|
// <i> Define event recording level bitmask for events generated from Stream Buffer functions.
|
|
// <i> Default: 0x05
|
|
// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
|
|
#define configEVR_LEVEL_STREAMBUFFER 0x05
|
|
// </e>
|
|
// </h>
|
|
|
|
// <h> Port Specific Features
|
|
// <i> Enable and configure port specific features.
|
|
// <i> Check FreeRTOS documentation for definitions that apply for the used port.
|
|
|
|
// <q>Use Floating Point Unit
|
|
// <i> Using Floating Point Unit (FPU) affects context handling.
|
|
// <i> Enable FPU when application uses floating point operations.
|
|
// <i> Default: 1
|
|
#define configENABLE_FPU 1
|
|
|
|
// <q>Use M-Profile Vector Extension
|
|
// <i> Using M-Profile Vector Extension (MVE) affects context handling.
|
|
// <i> Enable MVE when application uses signal processing and ML algorithms.
|
|
// <i> Default: 0
|
|
#define configENABLE_MVE 0
|
|
|
|
// <q>Use Memory Protection Unit
|
|
// <i> Using Memory Protection Unit (MPU) requires detailed memory map definition.
|
|
// <i> This setting is only releavant for MPU enabled ports.
|
|
// <i> Default: 0
|
|
#define configENABLE_MPU 0
|
|
|
|
// <q> Use TrustZone Secure Side Only
|
|
// <i> This settings prevents FreeRTOS contex switch to Non-Secure side.
|
|
// <i> Enable this setting when FreeRTOS runs on the Secure side only.
|
|
#define configRUN_FREERTOS_SECURE_ONLY 0
|
|
|
|
// <q>Use TrustZone Security Extension
|
|
// <i> Using TrustZone affects context handling.
|
|
// <i> Enable TrustZone when FreeRTOS runs on the Non-Secure side and calls functions from the Secure side.
|
|
// <i> Default: 1
|
|
#define configENABLE_TRUSTZONE 0
|
|
|
|
// <o>Minimal secure stack size [words] <0-65535>
|
|
// <i> Stack for idle task Secure side context in words.
|
|
// <i> This setting is only relevant when TrustZone extension is enabled.
|
|
// <i> Default: 128
|
|
#define configMINIMAL_SECURE_STACK_SIZE ((uint32_t)128)
|
|
// </h>
|
|
|
|
//------------- <<< end of configuration section >>> ---------------------------
|
|
|
|
/* Defines needed by FreeRTOS to implement CMSIS RTOS2 API. Do not change! */
|
|
#define configCPU_CLOCK_HZ (SystemCoreClock)
|
|
#define configSUPPORT_STATIC_ALLOCATION 1
|
|
#define configSUPPORT_DYNAMIC_ALLOCATION 1
|
|
#define configUSE_PREEMPTION 1
|
|
#define configUSE_TIMERS 1
|
|
#define configUSE_MUTEXES 1
|
|
#define configUSE_RECURSIVE_MUTEXES 1
|
|
#define configUSE_COUNTING_SEMAPHORES 1
|
|
#define configUSE_TASK_NOTIFICATIONS 1
|
|
#define configUSE_TRACE_FACILITY 1
|
|
#define configUSE_16_BIT_TICKS 0
|
|
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
|
|
#define configMAX_PRIORITIES 56
|
|
#define configKERNEL_INTERRUPT_PRIORITY 255
|
|
|
|
/* Defines that include FreeRTOS functions which implement CMSIS RTOS2 API. Do not change! */
|
|
#define INCLUDE_xEventGroupSetBitsFromISR 1
|
|
#define INCLUDE_xSemaphoreGetMutexHolder 1
|
|
#define INCLUDE_vTaskDelay 1
|
|
#define INCLUDE_xTaskDelayUntil 1
|
|
#define INCLUDE_vTaskDelete 1
|
|
#define INCLUDE_xTaskGetCurrentTaskHandle 1
|
|
#define INCLUDE_xTaskGetSchedulerState 1
|
|
#define INCLUDE_uxTaskGetStackHighWaterMark 1
|
|
#define INCLUDE_uxTaskPriorityGet 1
|
|
#define INCLUDE_vTaskPrioritySet 1
|
|
#define INCLUDE_eTaskGetState 1
|
|
#define INCLUDE_vTaskSuspend 1
|
|
#define INCLUDE_xTimerPendFunctionCall 1
|
|
|
|
/* Map the FreeRTOS port interrupt handlers to their CMSIS standard names. */
|
|
#define xPortPendSVHandler PendSV_Handler
|
|
#define vPortSVCHandler SVC_Handler
|
|
|
|
/* Ensure Cortex-M port compatibility. */
|
|
#define SysTick_Handler xPortSysTickHandler
|
|
|
|
#if (defined(__ARMCC_VERSION) || defined(__GNUC__) || defined(__ICCARM__))
|
|
/* Include debug event definitions */
|
|
#include "freertos_evr.h"
|
|
#endif
|
|
|
|
#endif /* FREERTOS_CONFIG_H */
|