37 lines
1.5 KiB
C
37 lines
1.5 KiB
C
// Copyright (c) 2023 Cesanta Software Limited
|
|
// All rights reserved
|
|
//
|
|
// This file contains essentials required by the CMSIS:
|
|
// uint32_t SystemCoreClock - holds the system core clock value
|
|
// SystemInit() - initialises the system, e.g. sets up clocks
|
|
|
|
#include "hal.h"
|
|
|
|
uint32_t SystemCoreClock = SYS_FREQUENCY;
|
|
|
|
void SystemInit(void) { // Called automatically by startup code
|
|
SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); // Enable FPU
|
|
asm("DSB");
|
|
asm("ISB");
|
|
SETBITS(SYSCTL->MOSCCTL, BIT(3) | BIT(2),
|
|
BIT(4)); // Enable MOSC circuit (clear NOXTAL and PWRDN, set >10MHz
|
|
// range)
|
|
SETBITS(SYSCTL->MEMTIM0,
|
|
BIT(21) | BIT(5) | 0x1F << 21 | 0xF << 16 | 0x1F << 5 | 0xF << 0,
|
|
FLASH_CLKHIGH << 22 | FLASH_WAITST << 16 | FLASH_CLKHIGH << 5 |
|
|
FLASH_WAITST << 0); // Configure flash timing (not yet applied)
|
|
SETBITS(SYSCTL->RSCLKCFG, 0xF << 24 | (BIT(9) - 1),
|
|
3 << 24); // Clear PLL divider, set MOSC as PLL source
|
|
SYSCTL->PLLFREQ1 = (PLL_Q - 1) << 8 | (PLL_N - 1)
|
|
<< 0; // Set PLL_Q and PLL_N
|
|
SYSCTL->PLLFREQ0 =
|
|
BIT(23) | PLL_M << 0; // Set PLL_Q, power up PLL (if it were on, we'd
|
|
// need to set NEWFREQ in RSCLKCFG instead)
|
|
while ((SYSCTL->PLLSTAT & BIT(0)) == 0) spin(1); // Wait for lock
|
|
SYSCTL->RSCLKCFG |=
|
|
BIT(31) | BIT(28) |
|
|
(PSYSDIV - 1) << 0; // Update memory timing, use PLL, set clock divisor
|
|
|
|
SysTick_Config(SystemCoreClock / 1000); // Sys tick every 1ms
|
|
}
|