h1-mod/deps/curl/tests/libtest/lib500.c
2024-03-07 00:54:32 -05:00

159 lines
5.2 KiB
C

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* SPDX-License-Identifier: curl
*
***************************************************************************/
#include "test.h"
#include "testtrace.h"
#include "memdebug.h"
#ifdef LIB585
static int counter;
static curl_socket_t tst_opensocket(void *clientp,
curlsocktype purpose,
struct curl_sockaddr *addr)
{
(void)clientp;
(void)purpose;
printf("[OPEN] counter: %d\n", ++counter);
return socket(addr->family, addr->socktype, addr->protocol);
}
static int tst_closesocket(void *clientp, curl_socket_t sock)
{
(void)clientp;
printf("[CLOSE] counter: %d\n", counter--);
return sclose(sock);
}
static void setupcallbacks(CURL *curl)
{
curl_easy_setopt(curl, CURLOPT_OPENSOCKETFUNCTION, tst_opensocket);
curl_easy_setopt(curl, CURLOPT_CLOSESOCKETFUNCTION, tst_closesocket);
counter = 0;
}
#else
#define setupcallbacks(x) Curl_nop_stmt
#endif
int test(char *URL)
{
CURLcode res;
CURL *curl;
char *ipstr = NULL;
if(curl_global_init(CURL_GLOBAL_ALL) != CURLE_OK) {
fprintf(stderr, "curl_global_init() failed\n");
return TEST_ERR_MAJOR_BAD;
}
curl = curl_easy_init();
if(!curl) {
fprintf(stderr, "curl_easy_init() failed\n");
curl_global_cleanup();
return TEST_ERR_MAJOR_BAD;
}
test_setopt(curl, CURLOPT_URL, URL);
test_setopt(curl, CURLOPT_HEADER, 1L);
libtest_debug_config.nohex = 1;
libtest_debug_config.tracetime = 1;
test_setopt(curl, CURLOPT_DEBUGDATA, &libtest_debug_config);
test_setopt(curl, CURLOPT_DEBUGFUNCTION, libtest_debug_cb);
test_setopt(curl, CURLOPT_VERBOSE, 1L);
if(libtest_arg3 && !strcmp(libtest_arg3, "activeftp"))
test_setopt(curl, CURLOPT_FTPPORT, "-");
setupcallbacks(curl);
res = curl_easy_perform(curl);
if(!res) {
res = curl_easy_getinfo(curl, CURLINFO_PRIMARY_IP, &ipstr);
if(libtest_arg2) {
FILE *moo = fopen(libtest_arg2, "wb");
if(moo) {
curl_off_t time_namelookup;
curl_off_t time_connect;
curl_off_t time_pretransfer;
curl_off_t time_starttransfer;
curl_off_t time_total;
fprintf(moo, "IP %s\n", ipstr);
curl_easy_getinfo(curl, CURLINFO_NAMELOOKUP_TIME_T, &time_namelookup);
curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME_T, &time_connect);
curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME_T,
&time_pretransfer);
curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME_T,
&time_starttransfer);
curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME_T, &time_total);
/* since the timing will always vary we only compare relative
differences between these 5 times */
if(time_namelookup > time_connect) {
fprintf(moo, "namelookup vs connect: %" CURL_FORMAT_CURL_OFF_T
".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
(time_namelookup / 1000000),
(long)(time_namelookup % 1000000),
(time_connect / 1000000), (long)(time_connect % 1000000));
}
if(time_connect > time_pretransfer) {
fprintf(moo, "connect vs pretransfer: %" CURL_FORMAT_CURL_OFF_T
".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
(time_connect / 1000000), (long)(time_connect % 1000000),
(time_pretransfer / 1000000),
(long)(time_pretransfer % 1000000));
}
if(time_pretransfer > time_starttransfer) {
fprintf(moo, "pretransfer vs starttransfer: %" CURL_FORMAT_CURL_OFF_T
".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
(time_pretransfer / 1000000),
(long)(time_pretransfer % 1000000),
(time_starttransfer / 1000000),
(long)(time_starttransfer % 1000000));
}
if(time_starttransfer > time_total) {
fprintf(moo, "starttransfer vs total: %" CURL_FORMAT_CURL_OFF_T
".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
(time_starttransfer / 1000000),
(long)(time_starttransfer % 1000000),
(time_total / 1000000), (long)(time_total % 1000000));
}
fclose(moo);
}
}
}
test_cleanup:
curl_easy_cleanup(curl);
curl_global_cleanup();
return (int)res;
}